THERE ARE NUMEROUS ADVANTAGES AND MODERN TECHNOLOGICAL FEATURES BUILT INTO EVERY FLORIAN
FLORIAN COMPETITOR 1 COMPETITOR 2
1/8" TEMPERED 1/8" TEMPERED 1/8" TEMPERED & ANNEALED
7/8" HERMETICALLY SEALED 5/8" DUAL SEAL NOT AVAILABLE
MC LOW-E NOT AVAILABLE NOT AVAILABLE
SUNCLEAN(self-cleaning glass) NOT AVAILABLE NOT AVAILABLE
ALUMINUM HORIZONTAL WITH OVERLAPPED GLASS WITH ROPE CAULK OVERLAPPED GLASS WITH ROPE CAULK
E.P.D.M. GASKETING FOR
This adds 25% more aluminum on any Warranty states that water will Glass may slip when rope caulk
given greenhouse, adding to it=s self- enter through laps in glass. Glass softens or melts in summer heat.
squaring of framing members and may slip when the caulk softens Mold and dirt forms at each over
sturdiness or melts in normal summer heat lapped glass.
CONTINUOUS RIDGE VENT SASH, RACK & PINION LIFTING Vent closes to a metal to metal
OPERATED BY AN ELBOW TYPE SYSTEM. Possibility of damage contact. Vent may leak in driving
PUSHROD, FASTENED TO A caused by misalignment. Rope rainstorm and is not energy
CENTRAL ROTATING SHAFT. caulk used for sealant. Metal to efficient.
E.P.D.M. glazing gasket used for each metal contact when vent is closed.
glass lite and as a perimeter seal when
vent is closed. No metal to metal
Aluminum AI@ beam 2" wide Aluminum AI@ beam main bar, Aluminum 1 1/8" wide, 0.3# per ft.
1.24 # per foot (inc. p. plate) bar cap comes in small sections This light weight design requires a
One piece bar cap for quicker with no gasketing (metal to glass) Sub-structure on all models.
installation, with E.P.D.M gasket Slower installation. (Galvanized Steel)
No glass slippage
Aluminum .514 # per foot, used in Small vinyl extrusion used to Small vinyl extrusion used to
walls and roof. separate vertical glass only. separate vertical glass only. Roof
Roof glass is over lapped. glass is over lapped.
STANDARD BAY WIDTH
30 7/8" 24 5/8" 20 1/4"
Sturdy aluminum frame permits
wider bay widths, allowing more
sunlight to enter.
ADDITIONAL DESIRABLE FEATURES AND BENEFITS OF THE GENEVA GREENHOUSE
LEAD TIME: 4-6 weeks from date of order, competitors 12 weeks
TERMS: 25% deposit to place the order, balance due before shipment
INSTALLATION: All units are pre-cut and pre-drilled and come with an easy to follow installation manual, auto-
cad shop drawings with details. A technical help line to walk you thru any questions you may have.